top

View previous topic Hope 103.2, Sydney, Australia View next topic

Post new topic Reply to topic Axia Discussion Board Forum Index | Station Pix    Page 1 of 1

Fri Dec 07, 2007 7:26 pm
PostPost subject: Hope 103.2, Sydney, Australia Reply with quote
Stephen Wilkinson



Joined: 01 Sep 2007
Posts: 16
Location: Hope 103.2, Sydney, Australia

Hope 103.2 in Australia is a Christian Community (public) Metro FM station.
http://hope1032.com.au/


Here are some Pictures of our Axia studio rebuild, Studio B.
The station was still onair with the old Sudio A.
Studio B was completed in November 2007 and became the main On Air studio.

OLD Studio B - RME 400 desk (circa 1979/80's)





Completed Studio B





Presenter/DJ position - Internet PC, 2x Dalet screens and Axia screen.
Easy sightlines to Guests and Producer on otherside of glass.




PhoneBox Touchscreen and CD Player location, with Mic Node and Element PSU.




Co Host Area (to right of DJ) - with seperate Phone control and Dalet screen




Guest Area with easy sightlines to DJ and extra position for 3rd guest



Processing and some Nodes (Nov 2007)





Studio A was the next Studio to be refited with Axia, it is a "mirror reverse" of Studio B and was completed in July 2008.


New desk work being installed





Studio A Completed






Close up of Axia Desk and Rack





Studio C was rebuilt in December 2008. It was mainly used for Voice Tracking as its analogue design/layout didn't really allow for interviews.
Now with the re-design it is capable of having two guests for face to face interviews.


Old Studio C








Clear Studio ready for new desk work








Equipment being installed











Studio C Completed







Rack room photos to come. Smile

Back to top View user's profile Send private message Visit poster's website
 
Tue Apr 13, 2010 12:35 am
PostPost subject: Dalet Reply with quote
mgalek



Joined: 29 Jan 2010
Posts: 6
Location: New York, NY

Stephen, are you guys using the Axia IP Audio Driver with your Dalet system? We are running Dalet 1.4F here at The Metropolitan Opera and was curious if the Axia drivers were compatible with Dalet.

thanks!
matt


_________________
The Metropolitan Opera
New York, NY
Back to top View user's profile Send private message
 
Tue Apr 13, 2010 9:11 am
PostPost subject: RE: Dalet Reply with quote
Stephen Wilkinson



Joined: 01 Sep 2007
Posts: 16
Location: Hope 103.2, Sydney, Australia

We're using the Axia IP drivers with Dalet but we're still running 5.1e, I think it sounds like you're running Dalet Plus.

They do run well with Dalet. The only weird issue seems to be a misalignment when in Multitrack mode between the display and what you hear on a fade envelope, though we rarely use this app "Surfer 2 or above". Straight recording and editing works well.

In my discussions with Dalet the drivers will work with your version, probably better, it would be good if Dalet became an Axia partner like Netia, then you'd get GPIO's included in the drivers.

I hope this is some help.


_________________
Stephen Wilkinson

Technical Operations Manager
Hope 103.2
Sydney, Australia
www.hope1032.com.au
Back to top View user's profile Send private message Visit poster's website
 
Tue Apr 13, 2010 7:22 pm
PostPost subject: Re: RE: Dalet Reply with quote
mgalek



Joined: 29 Jan 2010
Posts: 6
Location: New York, NY

Stephen Wilkinson wrote:
We're using the Axia IP drivers with Dalet but we're still running 5.1e, I think it sounds like you're running Dalet Plus.

They do run well with Dalet. The only weird issue seems to be a misalignment when in Multitrack mode between the display and what you hear on a fade envelope, though we rarely use this app "Surfer 2 or above". Straight recording and editing works well.

In my discussions with Dalet the drivers will work with your version, probably better, it would be good if Dalet became an Axia partner like Netia, then you'd get GPIO's included in the drivers.

I hope this is some help.


This is super helpful! Yes, we are actually running a kind of hybrid version of Dalet Plus and Dalet Radio HD. This summer when we have some down time in our opera season I'm going to try and get the drivers working on our Ingest machines. That would free up some AES nodes/Lynx cards and clean up a TON of cabling in our racks. Thanks for the insight Stephen.

-matt


_________________
The Metropolitan Opera
New York, NY
Back to top View user's profile Send private message
 
Fri Apr 23, 2010 4:42 am
PostPost subject: Thank you! Reply with quote
clarknovak



Joined: 25 May 2007
Posts: 163
Location: San Diego, CA

Stephen, these are fantastic pix (and great work shots too)! Thank you very much for sharing them.

_________________
Clark Novak
Marketing Director
Telos Alliance
Back to top View user's profile Send private message Visit poster's website
 
Wed Apr 18, 2012 5:27 am
PostPost subject: Re: RE: Dalet Reply with quote
CDMichaels



Joined: 01 Sep 2011
Posts: 1
Location: Miami, Florida U.S.A.

Stephen Wilkinson wrote:
We're using the Axia IP drivers with Dalet but we're still running 5.1e, I think it sounds like you're running Dalet Plus.

They do run well with Dalet. The only weird issue seems to be a misalignment when in Multitrack mode between the display and what you hear on a fade envelope, though we rarely use this app "Surfer 2 or above". Straight recording and editing works well.

In my discussions with Dalet the drivers will work with your version, probably better, it would be good if Dalet became an Axia partner like Netia, then you'd get GPIO's included in the drivers.

I hope this is some help.


Hello Stephen; you mention running Dalet 5.1e with Axia Audio Hardware using the IP Audio Driver. Are you able to use Dalet 5.1e with Axia to record multiple feeds? How about AUTO INPUT? Can you pass audio at the inputs to the outputs? What OS (2k, xp pro) and service pack are you running Dalet 5.1e on, what patch level of Dalet are you using?

I can run 8 stereo outputs, but can't record without samplingp generated noise and AUTO INPUT is broken (patch level?). Also, playback generates pop at end of file or at loop point

Back to top View user's profile Send private message
 
Post new topic Reply to topic Axia Discussion Board Forum Index | Station Pix    Page 1 of 1
Display posts from previous:   
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum