Post subject: Packet Loss Windows IP-Driver V.22.214.171.124
Joined: 01 Sep 2007
I have a little problem with an axia ip-drvier 16 Channel for Windows. I'm running windows xp (service pack 3) with driver version 126.96.36.199 on a dell precision R5400 Intel Xeon E5405 2GHz with 3,25 GB Ram. The network card is a Braodcom NetXtreme 57xx Gigabit controller.
The cpu-load is around 6% and the used memory around 280 MB.
On the driver i have 5 input-channes in use no output. i use this pc only for recording.
All run fine for a year, than without any change in software or hardware configuration i experince packet losses. if i open the statistics window in the axia driver configuration i have some RxUr and RxSeqErr.
I noticed that the packet loss goes up when i move a window or open the settings in windows xp. the strange thing is that doing this the cpu-load goes up only to 1% more.
does anybody know what that problem could be?
the bad thing is that i hear the packet loss on the registred audio.
_________________ "I love deadlines. I like the wooshing sound
they make as they fly by."
Joined: 25 May 2007
Location: San Luis Obispo, CA
and I bet the 5 streams you are recording are Live Stereo streams. Live Stereo is a low latency audio stream and in order to do this requires a lot of small packets. PC don't do too well with Live stereo. Look at converting the streams to Standard stereo through vmode or vmix.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum