top

View previous topic Axia iQ Phone controller with a Telos iQ6 View next topic

Post new topic Reply to topic Axia Discussion Board Forum Index | iQ & Radius Consoles    Page 1 of 1

Tue Aug 02, 2011 4:44 am
PostPost subject: Axia iQ Phone controller with a Telos iQ6 Reply with quote
AXIA_milos
Axia Team


Joined: 25 May 2007
Posts: 279
Location: San Luis Obispo, CA

to configure the iQ phone controller to control the 6 possible lines of an iQ6, edit the show profile of interest (or all 4).
under the Phone Connection heading, there is a "Phone Server IP" field. Enter in the user:password@IPaddress
Code:
telos:telos@192.168.2.37

You then need to enter in the "Studio Name" field
Code:
Hybrid 1&2

leave the show name field blank as this is used in VX Engine.

For the iQ6 source profiles (Livewire sources), make sure you select an option in the "Hybrid for Telos phone" field. You should select the
"Selectable" option.

Backfeed (mixminus) should happen automatically as long as you have two Livewire outputs set to "Auto backfeed", There is no configuration other than dedicating two outputs in such a manner.

Back to top View user's profile Send private message Send e-mail
 
Post new topic Reply to topic Axia Discussion Board Forum Index | iQ & Radius Consoles    Page 1 of 1
Display posts from previous:   
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum