AXIA_milos
Axia Team
Joined: 25 May 2007
Posts: 279
Location: San Luis Obispo, CA
|
Hello MattT
Pathfinder uses TCP to communicate to devices, so if the network allowed for these connections, then Pathfinder should be able to connect and issue commands to devices. iPort has control messaging that can be allowed through the WAN port. In your case, it sound like you wish to also control routes of Livewire devices. In this case you would either need to establish the TCP connections or use SA-Protocol between sites (between Pathfinder machines).
|
|
|