top

View previous topic Changing paths with two IQ consoles View next topic

Post new topic Reply to topic Axia Discussion Board Forum Index | iQ & Radius Consoles    Page 1 of 1

Wed Feb 18, 2015 4:03 am
PostPost subject: Changing paths with two IQ consoles Reply with quote
David



Joined: 06 Jan 2011
Posts: 19
Location: Park Rapids, Minnesota

I am currently using the channel on/off logic of an IQ console to do route changes via Pathfinder. Example: LW channel 12101 logic is tracked to change the IQ-1 PGM 3 LW output to a different destination if the ON button of the IQ-1 console is pushed and change the path back to the default when the OFF button is pushed.
If I now add a second IQ studio and want to make the second IQ(IQ-2) do the same thing. LW Channel 12101 tracked to route IQ-2 PGM3 LW output when the IQ2 ON button is pushed and change back to its default when the OFF button is pushed.

Can this be done using the same LW channel 12101? It looks like both IQ's will trigger the same logic pins since the logic is following the same LW channel.

Back to top View user's profile Send private message
 
Post new topic Reply to topic Axia Discussion Board Forum Index | iQ & Radius Consoles    Page 1 of 1
Display posts from previous:   
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum